– Page 14 –
AL.ACK
key the new operating voltage is now set. The new operating voltage is now set.
To set Mains CT primary current
Press
key to select select Mains CT primary Current value. (Ex. If a 1000/5A CT is used, then the primary
value should be set to 1000 in the four digit format as follows)
METERING SETUP
MAINS PRIMARY
CURRENT SET
1000
It is essential to set the Mains CT primary current value. To do this, press
key and the first slash (digit) will
start blinking. Now, select
key and when this is pressed, the digits will change. Insert the currosponding CT
primary value and press
AL.ACK
key to save setting. The new mains primary current is now set.
To set iSaver CT primary current
Press
key to select select iSaver CT primary Current value. (Ex. If a 400/5A CT is used, then the primary
value should be set to 400 in the four digit format as follows)
METERING SETUP
iSaver PRIMARY
CURRENT SET
0600
It is essential to set the iSaver CT primary current value. To do this, press
key and the first slash (digit) will
start blinking. Now, select
key and when this is pressed, the digits will change. Insert the currosponding CT
primary value and press
AL.ACK
key to save. The new iSaver primary current value is now set.
To set the Clock
By using
keys, the following screen will appear.
