8 Pin Connector
Orange wire – (-) 200mA Grounded Output When Armed –
This wire will become grounded when the alarm is armed. The current capacity of
this wire is 200mA. This output can control starter disable preventing any
unauthorized starting.
87
87a
85
30
86
Orange wire
from control module
“Start”
“On”
GREEN wire
X
Cut
GREEN
wire
White wire
“Acc”
“Off”
Starter
YELLOW wire to
Ignition Switch
Blue wire – Ground Instant Trigger Input (-)
This wire is the ground trigger input wire for hood and or trunk pin switches.
Black / White wire – (-) 200mA Dome Light Control Output –
This wire becomes grounded
when the dome light control
circuit is active. The current
capacity of this wire is 200mA.
This wire can control the
operation of the interior lights
when the system is disarmed.
An optional 10 Amps relay can
be used to this system for
interior lights operation.
87a
86
87
30
85
Fuse
BL/ White
+12V
Door
Switch
Courtesy
Light
Brown / White wire – (-) 200mA Horn Output –
This wire is provided to use the existing vehicle's horn as the alarm system's
warning audible device. It's a transistorized low current output, and should only be
connected to the low current ground output from the vehicle's horn switch. When the
system is triggered, the horn will sound
Gray wire – (-) 200mA Channel 3 (Trunk) Output –
This will become a 1 second pulse ground by pressing (button 3)
on transmitter
for two seconds, the current capacity of this wire is 200 mA. This feature allows you
to remotely control trunk release or other electric device. (Relay may be required).
Brown wire – (+) SIREN OUTPUT –
This wire is provides power to the supplied siren. Connect the Brown wire to the
Red wire of the siren. Connect the Black wire of the siren to a stable chassis
ground.
