Passive Arming
When programmed for the optional Passive Arming feature, the system arms itself
automatically, each time the ignition is turned off and all of the doors, hood, and trunk
are closed.
TO start the Passive Arming Process:
1. Turn off the ignition.
2. Open the door and exit the vehicle.
Once all doors are closed and the dome light is off, the LED will begin flashing
rapidly.
3. After 30 seconds,
The siren will chirp,
The parking lights will flash,
The doors will lock,*
The status LED will begin flashing.
4. The system is now armed.
* If the Passive Locking feature is selected.
If the Passive Arming with Countdown feature is programmed, the siren will chirp
every 2 seconds until the system passively arms.
Note: If the Passive Arming feature is enabled, the Automatic Rearming feature will
also be enabled even if it was not already programmed.
Panic Mode
In the event of an emergency, the transmitter's Panic feature can be used to instantly
trigger the arm.
To activate the Panic Mode:
1. Press Button 4.
The alarm will sound.
The parking lights will flash.
The doors will unlock* allowing access to the vehicle,
2. Press the Unlock Button
to stop Panic Mode.
*If the ignition is on when the Panic feature is activated, the doors will lock for
personal safety.
Emergency Override
If the transmitter is lost or inoperable, the system can still be disarmed using the
following procedure. Before beginning this procedure be sure to have the ignition key
ready and know the location of the override switch.
TO Override the system:
1. Unlock the door using the key.
