manualshive.com logo in svg
background image

128-8128

1 of 24

Page 1

Model  APS-997a

Owner’s Manual

IMPORTANT ! 

 In order to provide you with the highest level of security to your

vehicle, this system is equipped with selectable manual override circuitry.  It is
possible that you will need to override you security system if the transmitter
becomes lost, or inoperative due to battery failure.  Reading the sections on
"Manually Overriding Your System" is necessary to fully understand the procedure
required to enable your vehicle in such situations.  In addition, the chart on the last
page of this manual has a section for the particular features and options installed
in your vehicle as well as the override method selected.  Although the default
mode is "Valet Switch" operation, the system can be configured for "Custom
Code" operation for enhanced security.  Confirm  the override mode selected on
the last page of this manual, and familiarize yourself with the section on it's opera-
tion.

FEATURES :

Š

1 Two Way 5 Button Remote Control  And 1 One Way 5 Button Remote Control

Š

Six Channel Code Learning Programmable Receiver

Š

 External Superheterodyne Transceiver Antenna

Š

Single Or Two User Programmable W/Separate Control Outputs

Š

Single Button Lock/Unlock or Separate Button Lock/Unlock or Both

Š

Remote Keyless Entry With Optional Access Guard (must have power door
locks)

Š

Selectable Manual Override Mode

Š

New Enhanced Panic Feature (Any button other than unlock stops siren, no
change to the units state)

Š

Smart Disarm (If triggered, elect to shut off siren, or disarm entire unit )

Š

Adjustable Shock Sensor Via The Transmitter (Pre-Detect Off, Pre & Full Detect
Off, City Mode)

Š

Safe Start Output Controlled From Channel 3 (Option Channel 3 For Trunk, Or
For R/S)

Š

24 Hour Time Start Mode

Š

Cold Temperature Start Mode

Š

2 or 4 Hour Automatic Start Mode

Š

Parking Meter Count Down Timer On LCD Remote

Š

Additional Count Down Timer Mode

Š

Remote Panic In All Modes (Press & Hold Lock /Unlock Button For 3 Seconds
To Engage)

Š

Improved Custom Code Override, User Selectable and Programmable

4 Button Remote Start Security System With

Plug-In Shock Sensor & Starter Disable

Taken from 997 edit/clarify 24 hr start text, replace one way transmitter graphics with new style
Transmitter 07SP 5/07

Содержание Prestige Platinum 128-8128

























Отзывы: