manualshive.com logo in svg

Encore ENNHD-1000, User Manual

Share
Download
Encore ENNHD-1000 User Manual Download Page 63

USB 

 

Detail 

 
The Detail page shows the information of the connected USB devices: 
 

USB Class: 

The USB device type.   

Manufacturer: 

The manufacturer of the connected USB device 

Device Name: 

Name of the connected USB device. 

USB 2.0/ 1.1: 

The USB standard supported by the connected USB device. 

   

 

 

 

Disk Setup 

 
The Disk Setup page allows users to:   
1.

 

Get information about the connected USB storage. 

2.

 

Format the connected USB storage device. 

3.

 

Mount the USB storage to the device. 

 

USB Storage information 

 

Name (1~16 characters):  Define a name for the USB storage device. 

Note: The name is also the folder name after 
mounting the USB storage to the device. For more 

information to mount the device, please see” 
Mount/ Dismount Your USB Storage to the 

Device” 

Description: 

The partition order of the USB storage device. 
Note:   

1. The device recognizes the first four partitions of 
your USB storage only. We recommend users not 
to format the USB storage for more than 4 

partitions. 
2. The device support one connected USB storage 

 

62

Summary of Contents for ENNHD-1000










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands