5.
The window shows the connection status of the NAS in your LAN. You may click
on each NAS to get detailed information of each NAS. Select the NAS that you
are going to connect to and click the
button.
Note: The device cannot detect your hard drive if your hard drive is not formatted
as EXT3 format. It shows no capacity on this widow. To format your HD, please refer
to “HD Format” after accessing the device.
6.
You may select “Auto assign IP Address”, which allows the PNMD to assign IP
addresses for the device, or select “Use the IP Address as below”, fill in IP
address for this device. Enter the username and password and click OK.
Note:
The default username/ password are admin/ admin. To get information modifying
the username and password, see “Administrator- Superuser Password
Setting”
27
