6.
After successful installation, the
shortcut shows on your windows
desktop.
Note: For instructions using the software, please refer to chapter “ Using EZIP
Backup to backup your files” in Appendix.
Making Connection with the Device
Before You Start
IP Protocol Setup
Configuring the network protocols
For users to launch the device easily, we provide the convenient PNMD software,
which detects this device automatically in your LAN.
To function the PNMD correctly, please make sure that your PC DOES NOT obtain IP
address automatically or the PNMD will not be able to initialize the setup procedure
according to your network settings.
Note: If you have accessed the device and enabled the DHCP function for the
device. You are allowed to use the PNMD without specifying static IP address for
your computer. Please note that you should connect your PC and the device to a
router with DHCP server.
The following chapter indicates how to configure an IP address for your PC. Users
that have had a specified IP, please skip this chapter to “Connect the device with
PNMD” to proceed.
How to configure the TCP/IP network protocol of your PC
Before the following IP protocol settings, you have to get an IP address in advance.
If you don’t have any IP address or you are not going to access the device via our
PNMD, please choose an IP between 192.168.1.2~255 as your IP address. Please
DO NOT choose 192.168.1.1 for the IP address (192.168.1.1) has been set as the
default IP for this device.
Note:
1.
The default network setting of the device:
IP address:
192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Client:
Disabled
2.
In the following TCP/IP configuration guide, the IP address “192.168.1.2 ” is
assumed to be your IP address.
18
