8
VSR-30™ Installation Guide
8
To save the configured scenario (if it has not already been saved), do the following:
a
Write
the configuration. (See
Section F, Saving (Writing) the Device’s Configuration
.)
b
Reset
the device. (
Section G, Restarting (Resetting) the Device
.)
E.2 Device Addresses
To configure the device’s addresses, do the following:
1
On the Advanced Configurations menu, select Local Addresses.
2
On the Configure Local Addresses menu, select IP Address.
3
Enter the device’s IP address and press Enter. (Get the device’s IP address from your
network administrator.)
4
Select BANDIT Name.
5
Enter a unique name to identify this device in your network, and press Enter.
E.3 Ports
To configure software for the device’s ports, do the following:
1
On the Advanced Configurations menu, select Data Configuration.
❖
The Logical Port Protocol menu is displayed. (
Table 2
lists the Line IDs for the ports.)
BANDIT Plus
Configure Local Addresses
----------------------------
1) IP Address : 192.168.169.1
2) BANDIT Name : BANDIT Plus
Enter Choice :
Table 2. Port Identifiers
Line ID Physical (Hardware) Port Default Software Configuration
C
COM/Supervisor port
Comm/Supervisor
a
L
Ethernet LAN port
Ethernet
W
Ethernet WAN port
Ethernet
E
Expansion port
P
More ports
b
(See
Step 2
.)
a. Do not modify the configuration for the Comm/Supervisor port.
b. These are virtual Logical Ports. A protocol configured on a Logical Port can be
associated with a global path, which is turn is associated with a physical port. (See
Section E.3.1, Protocols
. For information on global paths, see the BANDIT Products
Software Configuration and Maintenance Guide.)
