VSR-30™ Installation Guide
15
5
To delete a profile from the VPN Profile Table, type the line number of the profile to
delete. (Line numbers are listed under the heading label No.)
❖
The selected profile is deleted. The VPN Profile Table is redisplayed, minus the
deleted profile. Return to
Step 2
.
E.4.1.1 Configuring Phase Proposals for IKE Autokeying
In VPN connections that use automatic keying (for example, Internet Key Exchange, or IKE),
the BANDIT VPN device negotiates keys and proposals for data transmission. You can
configure the proposals presented for each phase in the Internet Key Exchange.
To configure phase proposals for automatic keying, do the following:
1
On the VPN Profile Table, type m (to modify a line). Then type the line number and
press Enter. (See
Section E.4.1, Configuring VPN Profiles
.)
❖
The selected profile’s fields are displayed.
2
Select the phase you wish to modify.
❖
The proposals already configured for the phase are listed.
3
Do one of the following:
a
To return to the profile display, press Escape.
❖
The profile’s list of fields is displayed. Go to Step 3
d
in
Section E.4.1, Configuring VPN
Profiles
.
b
Select the proposal you wish to modify for this phase.
❖
The proposal’s values are listed.
◆
Sample Phase 1 Proposal Menu:
Phase 1 Proposal 1
------------------------
1) Authentication Mode : Preshared
2) DH Group: DH GROUP G2
3) Encryption: DES
4) Authentication: HMAC-MD5
5) Life: 100 sec
6) Life Units: sec
Enter your choice:
