VSR-30™ Installation Guide
11
2
Select the option you want this port to use.
❖
If you select None, the device does not use this port for DHCP. Press Escape until you
return to the port’s Logical Port Attribute menu. Go to
Step 5
.
❖
If you select Client, the device uses this port to request its IP address. (On the WAN
port, the device requests its public IP address.) No further configuration is required for
the DHCP client role. Press Escape until you return to the port’s Logical Port Attribute
menu. Go to
Step 5
.
❖
If you select Server, the device uses this port to assign IP addresses. (On the LAN
port, the device assigns private IP addresses.) The Logical Port Attribute menu is
redisplayed, with a menu item for configuring the DHCP server.
3
Select DHCP Server Parameters.
❖
The DHCP Server Parameters menu appears.
4
Select and configure each parameter the device will use as the local (intranet) DHCP
server. When you have finished configuring the DHCP server, press Escape until you
return to the port’s Logical Port Attribute menu.
5
When you have finished configuring the port, press Escape until you return to the Main
Menu.
6
Save the configuration and reset the device. See
Section F, Saving (Writing) the Device’s
Configuration
, and
Section G, Restarting (Resetting) the Device
.
E.3.3 Dial Backup Settings
1
To configure a port for dial backup, select Dialup Configuration on the Logical Port
Attribute menu (see
Section E.3, Ports
).
Note:
A port can be configured for dial backup only if its protocol supports dial
backup. The port’s Logical Port Attribute menu will not allow this option unless the
protocol supports it. To select a protocol that supports dial backup, see
Section E.3.1,
Protocols
.
2
Configure the parameters for the dialup. When you have finished, press Escape to
return to the Logical Port Attribute menu.
DHCP SERVER PARAMETERS
----------------------------
1) Local DHCP Server IP Address (N.N.N.N):0.0.0.0
2) DHCP Pool IP Address Low (N.N.N.N) :0.0.0.0
3) DHCP Pool IP Address High (N.N.N.N) :0.0.0.0
4) DHCP Network Mask (N.N.N.N) :255.255.255.0
5) DHCP Lease Time (minutes) : 1440
6) Domain Name for DHCP clients:
7) Primary Router (N.N.N.N) :0.0.0.0
8) NETBIOS Server (N.N.N.N) :0.0.0.0
Enter the number of the item to change:
