10
VSR-30™ Installation Guide
4
To modify the port’s default settings, see the following:
•
Section E.3.1, Protocols
•
Section E.3.2, DHCP Settings
(only for the WAN and LAN ports)
•
Section E.3.3, Dial Backup Settings
E.3.1 Protocols
To change the protocol that a port uses, or to modify attributes of a port’s protocol, do the
following on the Logical Port Attribute menu (see
Section E.3, Ports
):
1
If you do not wish to change the protocol this port uses, go to
Step 3
.
2
To change the protocol the port uses, do all of the following:
a
Select Undefine Current Logical Port.
b
Select Protocol.
c
On the Logical Port Protocol Selection menu, select the protocol you want this port to
use. Go to Step 3
a
.
3
To modify parameters in the port’s protocol, select Protocol.
❖
The protocols available for the port are displayed.
a
On the protocol configuration menu, select and change parameters to work in your
network.
b
When you have finished configuring the protocol, press Escape to return to the Logical
Port Attribute menu.
E.3.2 DHCP Settings
To review settings that the WAN or LAN port uses for DHCP, or to modify or disable DHCP
on a port, do the following on the port’s Logical Port Attribute menu (see
Section E.3, Ports
).
Note:
The WAN and LAN ports use different settings. Typically, a BANDIT device is a
DHCP client on the WAN port and is a DHCP server on the LAN port. You may enable,
modify, or disable use of DHCP on one port or on both ports.
1
Select DHCP Type.
❖
The DHCP Type menu appears.
DHCP Type
----------
1) Server
2) Client
3) None
Enter Choice :
