24
VSR-30™ Installation Guide
For more information, see the BANDIT Products Software Configuration and Maintenance Guide.
E.5.3 Network Address Translation
You can use the BANDIT products for network address translation (NAT).
If your connections will include VPNs across satellite networks, the BANDIT device will use
selective layer encryption. Before configuring the NAT Table, read
Section E.4.3, Selective
Layer Encryption in VPNs
.
To use network address translation, do the following:
1
On the IP Routing Configuration menu, select Network Address Translation.
2
On the Network Address Translation menu, do the following:
a
Select a NAT configuration scheme.
b
Enable and configure the NAT configuration scheme according to your network plan—
e.g., for masquerading, or for a NAT table.
For more information, see the BANDIT Products Software Configuration and Maintenance Guide.
E.5.4 Firewall
The default settings for the VSR do not use the firewall feature. If you wish to configure the
firewall, do the following.
1
On the Main Menu, select Typical Configurations.
2
On the Typical Configurations menu, select Configure Firewall.
3
On the Configure Firewall menu, configure the policy table, NAT profiles, and IP
interfaces for your network’s dynamic firewall.
For more information, see the BANDIT Products Software Configuration and Maintenance Guide.
E.6 Simple Network Management Protocol
If you wish to use Simple Network Management Protocol (SNMP) with the VSR, do the
following to configure the device’s built-in SNMP agent:
1
On the Main Menu, select System Administration.
2
When the system asks for your password, enter the default password and press Enter.
Note:
If your product order requested a different, specific password, contact your
system administrator for the password.
3
On the System Administration menu, select SNMP Configuration.
4
On the SNMP Configuration menu, do the following:
a
Configure the SNMP Get Community String.
b
Configure the SNMP Set Community String.
c
Configure the SNMP Trap Default Address.
