Users’ Manual
EAN-90M Tiltmeter
Page
|
4
Installation on horizontal surface
1 Using mounting bracket as a template, mark position of two mounting holes.
2 Visually ensure that the two hole positions are almost aligned along the axis at which tilt has to be
measured.
3 Drill two
8 mm Φ x 50 mm deep holes for Hilti anchor
HAS M8 x 75 or equivalent.
4 Insert anchors in drilled holes.
5 Mount tilt meter bracket on the anchors and tighten slightly.
6 Fix the tilt meter on mounting bracket with two M6 x 20 mm Allen bolts.
7 Connect tilt meter with read-out unit.
8 Tighten anchors and Allen bolts/nuts so that the tilt meter reads almost vertical on the read-out unit.
4
Anchor (HSA M8 x 75 Hilti)
6
5
Plain washer, SS
Sensor mount plate
2
3
1
Item
Tilt meter
Surface mounting bracket
Allen bolt, SS, M6 x 25
Description
2
1
4
1
1
4
Qty.
Figure 2: Tiltmeter on horizontal surface
2
G. L.
3
1
5 6
4
