ENC EDS300 Series, Manual

Page: 33 / 57

Function parameter schedule graph
29
interval
F9.03 Motor overload protection
mode selection
0: No action
1: Inverter cut off output at once 1 1 ×
F9.04 Motor overload protection
coefficient
20.0
～
120.0
（
%
）
0.1(%) 100.0
(%)
×
F9.05 Overload alarm checkout
level
20 ～ 200 （ % ） 1(%) 130(%) ○
F9.06 Overload alarm delay time 0.0 ～ 20.0s 0.1s 5.0s ○
F9.07 Overvoltage stall selection 0: Banned
1: Allowed
1 1 ×
F9.08 Stall overvoltage point 120
～
150
（
%
）
1(%) 140(%) ○
F9.09 Automatic current
limiting level
110
～
200
（
%
）
1(%) 150(%) ×
F9.10 Frequency descending
rate during current
limiting
0.00
－
99.99Hz/s 0.01Hz
/s
10.00Hz
/s
○
F9.11 Automatic current
limiting action selection
LED Units digit
0
： Invalid
1
：
Valid
LED Tens digit ： Input loss phase detection
0
：
Invalid
1 ： Valid
1 00 ×
Fd
－
Failure record function parameter
Function
code
Name Set range
Min
unit Factory
default
modifi
cation
Fd.00 Previous one failure record Previous one failure record 1 0 *
Fd.01 Previous two failure record Previous two failure record 1 0 *
Fd.02 Previous three failure record Previous three failure record 1 0 *
Fd.03 Previous four failure record Previous four failure record 1 0 *
Fd.04 Previous five failure record Previous five failure record 1 0 *
Fd.05 Previous six failure record Previous six failure record 1 0 *
Fd.06 Set freq. at previous failure Set freq. at previous failure 0.01Hz 0 *
Fd.07 Output freq. at previous failure Output freq. at previous failure 0.01Hz 0 *
Fd.08 Output current at previous failure Output current at previous failure 0.1A 0 *
Fd.09 Output volt. at previous failure Output volt. at previous failure 1V 0 *
Fd.10 DC bus-bar vlot. at previous failure DC bus-bar vlot. at previous failure 1V 0 *
Fd.11 Load motor speed at previous Load motor speed at previous failure 1(r/m) 0 *
Fd.12 Module temp. at previous failure Module temp. at previous failure 1 ℃ 0 *
Fd.13 Input end state at previous failure Input end state at previous failure 0 *
Fd.14 Accu. runtime at previous failure Accu. runtime at previous failure 0 *
FF
－
Code and manufacturer function parameter
Function
code
Name Set range
Min
unit Factory
default
modifi
cation
FF.00 User password 0000
～
9999 1 0000 ×
FF.01 Manufacturer password 0000
～
9999 1 0000 ×
ENC