ENC EDS300 Series Manual Download Page 2 | Manualshive

Page: 2 / 57

ENC EDS300 Series Manual Download Page 2

Print version: V1.1

Foreword

Encom EDS300 are designed and produced according to EN61800-5-1: 2007,

EN 61010-1: 2010, EN61800-3: 2004+A1: 2012 standards.

Thank you for purchasing EDS300 series mini universal inverter from

Shenzhen Encom Electric Technologies CO., LTD.

EDS300 series frequency converter adopts advanced control mode to realize

high torque, high precision and wide speed regulation drive, which can meet various
requirements of general frequency converter. EDS300 is the organic combination of
general customer demand and industry demands, to provide a practical PID
controller, a simple PLC, programmable input/output terminal control, remote
synchronization control, pulse frequency and other special frequency converter
control powerful functions. It is of great value to reduce the cost and improve the
reliability of the system by providing the customers of equipment manufacturing and
automation engineering with the integrated solution of high integration.

EDS300 use the space voltage vector PWM control and without sensor vector

control technology and electromagnetic compatibility overall design, to meet the
customer for the applicable place of large torque low noise, low electromagnetic
interference environmental requirements.

Assembling wiring, parameter setting, troubleshooting and daily maintenance

notice are available in this manual. To make sure that you can correctly assemble
and operate EDS300 series inverters to exert their excellent performance, please
read this user manual detailedly before you assemble the device and conserve the
manual appropriately before the end-user get them.

Please contact our office or dealer in all places at any moment if you have any

doubts or special demands when using these inverters, and you can also contact our
after service center in our headquarters directly. We will serve you with all our heart.

We reserve our right to notice you if we change contents of this manual.

ENC

«
1
2
3
4
...
»

Summary of Contents for EDS300 Series


























































Reviews:

No comments