WIND TECHNOLOGY
+34 96 556 00 18 [email protected]
Avenida de Ibi 44
–
P.O. 182-03420 | Castalla (Alicante), España
www.enair.es
P a g e
|
25
Step 1: Remove Cone
To perform maint enance operat ions, it w ill be necessary t o remove t he cone and the rear
cover.
Step 2: Visual Inspection interior elements
To remove the cone, you can use any w rench or
any elongat ed object that f it s into the screw slot .
To loosen, torque in the opposite direction of the
usual loosening must be applied.
Visually verif y t hat t here are no loose part s and
everyt hing is properly screw ed.
Check slackness of part s, simply by moving w it h
hand.
All screws should be tightened and parts must not
show slackness.
CAUTION: Before performing any maintenance, stop the mill, using the
braking contactor.
CAUTION: Attach one of the blades of the ENAIR to the lift
basket to prevent rotation of the rotor during maintenance
operations.
CAUTION: Do not perform any maintenance operation in high w inds
situations.
Summary of Contents for E30 PRO
Page 41: ......
