WIND TECHNOLOGY
+34 96 556 00 18 [email protected]
Avenida de Ibi 44
–
P.O. 182-03420 | Castalla (Alicante), España
www.enair.es
P a g e
|
20
Step 4: Rudder
Step 5: Upper casing
Screw s:
Allen screw clamp: DIN 912 A2 M10x55 INOX 6
Clamp pressure Washers: DIN 127 M-10 zinc plated 6
Clamp Washers: DIN 125 M-10 zinc plat ed 6
Tools:
Allen glass 8, ext ension cable and t orque w rench
Tightening torque:
46 Nm oder 34 Lbf .ft
Screws:
Allen screw casing: DIN 912 M8x25 A2 STAINLESS 4
casing pressure Washers: DIN 127 M7 zinc plat ed 4
casing Washers: DIN 125 M8 zinc plat ed 4
Tools:
Glass Allen 8, ext ension cable and t orque w rench
Tightening torque :
5Nm or 3.7Lbf .f t
ATTENTION: By tightening, there must remain a small clearance between the
clamp and the nacelle
Summary of Contents for E30 PRO
Page 41: ......
