EMU procussion, Operation Manual

Page: 76 / 125

76 Procussion operation manual
PROGRAMMING PROCUSSION
6) Play a note on your Keyboard or Drum Pad, and press the Cursor .
7) Play the note again and press Enter to assign the zone to a one-note
range. (The one-note range is only for simplicity. You may of course,
assign a wider range if desired.)
Select and Tune Instruments
8) Turn the Data Knob clockwise until you find the screen:
STACK INST S1L1
I000 None
Set the Stack and Layer numbers to S1 L1 as shown above.
9) Move the Cursor to the lower line as shown above.
10) While playing the note that you assigned in step 7, turn the Data Knob
until you find an instrument that you like. Press Enter .
11) Turn the Data Knob clockwise to the next screen:
STACK TUNE S1L1
CRSE+00 FINE+00
12) Move the Cursor to the lower line underneath the Coarse Tuning
value. Now turn the Data Knob to change the tuning. Notice how you
can completely change the character of the sound by tuning it out of
its normal range. Also notice the distortionless pitch shifting from
Procussion that makes this possible. Tune this first layer to your
liking, then press
Enter .
13) Now go back to the “STACK INST” screen to select the instrument for
layer 2.
14) Move the Cursor underneath the Instrument Layer parameter (see the
diagram above) and use the Data Knob to select Layer 2.
■
The cursor can be
moved to the function
select position (top-left)
by pressing Enter or by
using the cursor con-
trol. Either method is
fine. Custom Stack 1-8
Instrument Layer 1-4
Instrument
Selecting and Tuning Instruments