EMU procussion, Operation Manual

Page: 110 / 125

110 Procussion operation manual
PARAMETER EDITING
Parameters may be edited individually using system exclusive com-
mands. The kit being edited is the current kit. The value of a given
parameter may be changed by sending a
parameter value command. The
value of a parameter may be read by sending a parameter value request ,
to which the machine will respond by sending back the parameter value
command.
Kit data may also be transmitted or received in a single block (one
complete kit) using system exclusive commands. A
kit data request may
be issued by a host computer, to which the machine will respond by
sending the data block for the requested kit. Conversely, the computer
may send new kit data which will replace the specified kit currently in the
machine.
DATA DUMPS
The user can send kits and global data via MIDI for backup onto a
sequencer or other device. The options are:
Master settings
MIDI program/kit map
User zone maps
Factory kits
All user kits
One kit
PROGRAM/KIT MAP
MIDI program changes will normally correspond to internal kit numbers
0 to 127. However, the user may ‘re-map’ any MIDI program number,
assigning it to an arbitrary internal kit. This feature allows any of the
internal kits to be selected from a MIDI keyboard controller.
SOUND SETS
A sound set consists of 4 Megabytes of sample data (sound ROMs), plus
additional instrument data in the program ROMs. Procussion may con-
tain one or two complete sound sets. Each sound set has a unique ID
number.
MIDI SPECIFICATIONS
Parameter Editing