EMU procussion, Operation Manual

Page: 73 / 125

73 Procussion operation manual
PROGRAMMING PROCUSSION
PROGRAMMING PROCUSSION
CREATING A CUSTOM KIT
Creating your own custom kit is easy. First, you select the key range for
the zone. Then you may simply select the desired stack from the palette
of pre-programmed factory stacks. Repeat the two steps until you have a
large enough drum kit. You may assign up to 24 stacks to a kit and a zone
may contain 1 or 2 stacks.
BUILDING A CUSTOM KIT … STEP BY STEP
1) Select one of the “--default--” kits which are located at numbers 105-127.
2) Press the Edit button and go to the second screen, “STACK SELECT”.
3) Play the Pad or Key to select the Zone.
4) Move the Cursor underneath the Stack number and use the Data Knob
to change stacks until you find one you like.
5) Repeat steps 3 and 4 until your kit is complete. Then press Enter .
6) If you wish to rename your new kit, do so now using the “KIT NAME”
function.
7) Rotate the Data Knob to the last screen, “SAVE KIT". Move the Cursor
to the lower line and press Enter .
■
If you are using the
Procussion with a MIDI
keyboard, set the Zone
Map to “Kit” (Master
Menu). If you are using
MIDI drum pads or a
drum machine you
should use one of the
User Zone Maps or a
Zone Map which is
preprogrammed for
your controller.
■
The center of the
zone is always the origi-
nal pitch of the stack.
The original pitch of
most factory stacks is
set at “C”. If the zone is
out of tune, use the
Zone Tuning function to
tune the stack to the
correct pitch.
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Up to 24 Zones
Zone
1
Zone
2
Zone
24
MIDI Drums
36 48 60 72 84 96
MIDI
Note # -
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Drum
Stack
Up to 4 Instruments
which can be
controlled or switched
in various ways.
Zones larger than
1 note are used for
Tuned Percussion
PROCUSSION KIT
Zone 2
Zone 24
Zone 1
Creating a Custom Kit