
9
EN
Luciole REV 1 – Dec 2018
INSTRUCTIONS FOR CHARGING THE BATTERY
CAUTION:
The battery must be charged in dry environments.
It is recommended to fully charge the battery on first use.
• Remove the USB cap of support rod from the lighting fixture. (
1
)
• Insert the power supply (5V-2A USB characteristics - not supplied) into the power socket.
Information for the EU market: “The Class III appliance must be powered by a SELV source or equivalent”
(e.g. complaint with 62368-1 – type ES1). .
• Connect the terminal with the USB-micro plug in the appropriate socket (pay attention to the
direction) placed in the base of the lighting fixture (
5
) and make sure that during charging, the
product is firmly resting on a surface to prevent it from falling.
• A blue LED, positioned near the USB socket, lights up during charging and turns off when charging
is completed. The battery recharges in about 9 hours, obtaining an optimal charge level. If during
charging the blue LED flashes, it means there are problems:
− The internal and/or external temperature drops below 0°C or rises above 45°C, charging
automatically stops and this is highlighted by the flashing of the blue LED. Once the atmospheric
conditions have been restored, the blue LED lights up steadily again;
− A fully charged battery lasts approximately 8 hours. If the lamp is on and connected to the
battery charger, the indicated charging times are not guaranteed.
• When the red LED, positioned near the USB socket, lights up, it means that the battery has dropped
to 10%, it is recommended to connect it to the feeder. Moreover, to save battery life, do not leave it
connected to the feeder when the blue LED is off.
• The lamp turns on and off with a simple touch. (
3
)
• By holding down, you get the dimming effect, which increases or decreases the light’s intensity. (
4
)
MODEL PROTECTED BY COMMUNITY DESIGN REGISTRATION
PROVISIONS FOR END OF SERVICE LIFE
The battery is inserted directly inside the lighting fixture. IT IS STRICTLY FORBIDDEN to open and replace
the battery with another non-original one in order to avoid malfunction of the electronic circuit and failure
of the same. Contact a dealer for battery replacement.
To process the product at the end of its service life, keep in mind that a battery is located inside.
Therefore, it is recommended to follow the current federal/state/local regulations regarding disposal of the
product and the battery. Do not burn the product and the battery inside.
Summary of Contents for LUCIOLE
