EMS SmartCell, Programming Manual

Page: 17 / 80

©2020 EMS Ltd. All rights reserved. Page 17 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
INTRODUCTION
STATUS
FAULT
START
For additional information refer to TSD042
SLIDE TO
REMOVE
WZM Status LEDs
Function
This button is always active and is used for number entry (number 1) and for
upwards menu navigation.
This button is always active and is used for number entry (number 2) and for
forwards menu navigation.
This button is always active and is used for number entry (number 3) and for
downwards menu navigation.
This button is always active and is used for number entry (number 4) and for
backwards menu navigation.
This button is always active and is used as a menu entry button.
When a valid User PIN has been entered, pressing the Function 1 button will
switch between the first and second language selected for the system.
When a valid User PIN has been entered, pressing the Function 2 button for
2-3 seconds will send a resynchronisation signal to the WZM’s wireless
devices.
Button
1
3
2
4
FUNCTION 1
FUNCTION 2
Function
Illuminates when any device is in fire alarm condition.
Illuminates when any fault condition is present at the
WZM itself or if an associated device is in fault.
Indicates a good power supply.
LED Indicator
FIRE
FAULT
POWER
LED Colour
WZM buttons