EMS SmartCell Programming Manual Download Page 69

Page: 69 / 80

MK067-0001-99 (Issue 1) 04/11/2020 AJM

WZM MENUS

WZM Options

Set time & date

The ‘Set Time & Date’ menu allows an engineer to program the systems time and date. The time will be

displayed on the WZM display and the time and date is also used for time stamping events in the event log.

This menu option also allows the date format to be changed.

If the time and date is not set on the WZM the following display will be shown:

SmartCell WZM

Set Time & Date
00:00 Access

SmartCell WZM

Set Time & Date
00/00/00 Access

Lamp Test

This option when entered performs a lamp test on the WZM.

Front Screen Text

The front screen text can be edited in this menu.

WZM LED Disable

This menu option allows the engineer to disable the WZM’s external status LEDs.

Summary of Contents for SmartCell







































































Search results

Summary of Contents for SmartCell

Reviews:

Related manuals for SmartCell

Brands by name

Popular brands

EMS SmartCell, Programming Manual

Search results

Summary of Contents for SmartCell

Reviews:

Related manuals for SmartCell

Brands by name

Popular brands