EMS SmartCell, Programming Manual

Page: 58 / 80

©2020 EMS Ltd. All rights reserved. Page 58 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
Fire only
This menu displays the total number of fire alarms that are currently on the system. The total number is
shown next to the fire alarm text. Pressing the button details the individual devices in fire alarm. The
devices in fire alarm condition can then be scrolled through, using the and buttons.
Fault only
This menu displays the total number of faults that are currently on the system. The total number is shown
next to the fault text. Pressing the button will show individual devices in a fault condition. The devices
which can be either information or fire devices can be scrolled through, using the and buttons. A
fault description will be associated with any devices.
All events
This menu displays the total number of devices on the system. When entered, the individual device details
along with it’s current status are shown. The device list starts at the lowest address fire and these can be
scrolled through, using the and buttons. When all of the fire devices have been scrolled through,
the list will subsequently show all of the information devices, again in address number order.
1
3
1
3
1
3