![background image](http://html1.mh-extra.com/html/empire-comfort-systems/vfp32fb2cf-3/vfp32fb2cf-3_installation-instructions-and-owners-manual_2403886011.webp)
27061-4-1213
Page 11
figure 18
Caulk and install Duct termination
5. Push the handle for “open” position and pull the handle
for the “Closed” position. See Figure 17.
OPEN
CLOSED
figure 17
Completion of air Kit installation
1. Determine the length of 4” Dia. rigid or flex duct con
-
nector (installer supplied) you will need from the fire
-
box/fireplace to the exterior surface of the outside wall,
where the air kit hood will be installed. add a few extra
inches to the length to allow for easier attachment of
the outside duct connection prior to securing the out-
side rain cap hood to the building.
2. Secure the 4” dia. duct to the Slide assembly collar on
the firebox with band clamps or screws (installer sup
-
plied).
3. Run the other end of the duct through the exterior wall
cutout.
4. From the outside of the building, connect the duct to the
collar on the outside air vent assembly with band clamp
or screws to secure (installer supplied).
5. Secure the outside air Vent assembly to the outside
wall with the four 10 x 1 1/2 Hex Head Slotted Screws
provided. Seal with caulk as necessary. See Figure 6.
6. Figure 19 illustrates the various options for installation
of the air duct run possibilities.
figure 19