![background image](http://html.mh-extra.com/html/empire-comfort-systems/dvc26in71/dvc26in71_installation-instructions-and-owners-manual_2404055017.webp)
41380-0-0120
Page 17
Figure 10
INSTALLATION DIAGRAM
BLOWER ACCESS
PLATE
BLOWER
POWER CORD
OPTIONAL
LOW-VOLTAGE
WIRES
OPTIONAL ON/OFF
SWITCH LOCATION
VENT CLAMPS
INTAKE VENT
FLUE EXHAUST VENT
ROUND
TERMINATION CAP
DVKI2P KIT
(INCLUDES CO-AXIAL
ADAPTER AND FLASHING)
10’ MINIMUM
35’ MAXIMUM
USE HIGH-TEMP
SEALANT ON VENT
CONNECTIONS
USE HIGH-TEMP
SEALANT ON VENT
CONNECTIONS
INSTALL RETAINER SCREWS
THROUGH THE VENT CLAMPS
TO SECURE VENTING
VENT CLAMPS
NOTE: LONG EXTENSION
TUBE FOR INLET
CONNECTION
DVKI2P FLASHING SHOWN. IF A
LARGER OR DIFFERENT CONFIGURATION
IS REQUIRED, A FIELD-BUILT VERSION
(BUILT TO LOCAL CODES) IS ACCEPTABLE.
INSTALL SCREWS THROUGH
VENT CLAMPS TO SECURE
THE VENTING TO THE COLLARS