emmeti XECO Series, Installation Manual

Page: 4 / 40

4
GB GB
1. PRODUCT INTRODUCTION 1. PRODUCT INTRODUCTION
ON/OFF
1.3 Keys and LEDs on the indoor unit

Receiver for the infra-red signal sent by the remote control.

Red ‘Power ON’ LED, becomes white when the air conditioner

Display temperature

is cooling function.
5
Heating function
6
Dehumidification function
7
Test and/or emergency key.
The test and emergency functions are performed using the same key.
Emergency key.
To be used if the remote control is broken or the batteries flat. When
it is pressed, the air conditioner runs in automatic mode
1.1 Composition of the air conditioner
The air conditioners are of the “Split System” type, with air-air heat-
exchange.
They consist of two separate units:
- “Indoor unit”, to be placed inside the house.
- “Outdoor unit”, to be placed outside the house.
All the functions of the air conditioner are controlled by an “infrared
remote control”.
1.2 Indoor unit

Air inlet grille

Air outlet grille
Horizontal deflector: automatic control of the air-flow direction
(SWING)
- Deflettore verticale movimento manuale
3
Frontal panel
4
Air filters
5
Display
6
Alimentation electric cable, without plug (units only Single Hi-Wall)
7
Ionizer