09
A
SSEMBLY
FRONT WHEEL
Step 1: Unscrew the axle from the front fork and remove
the Brake Caliper Spacer.
Warning:
Do not pull the brake lever without the wheels
installed as this could misalign the brake pads or damage
the brake caliper.
Step 2: Place the front wheel in the fork with the disc side
aligned to the brake.
Step 3: Reinstall the axle through the fork and wheel.
Hand tighten the front axle and flip the quick release to
lock the front wheel in place. The quick release has
already been preset at the factory.
Step 4: Add
30psi
to the front and rear tires using a
bicycle pump with a presta valve adaptor.
Note:
Your tires have inner tubes in them to get you up
and riding. The tires and wheels are tubeless ready and
seperate valve stems are supplied should you choose to
convert to tubeless.
Summary of Contents for HASTE
