Eminent HASTE, Owner'S Manual

Page: 19 / 40

EMINENTCYCLES.COM
16
SEAT POSITION
When setting the seat position there are two adjustments
to consider, the Angle and Horizontal position. The seat
angle should be set first as this adjustment can change
your horizontal position.
Step 1: To test the proper seat angle, sit on the bike while
leaning against a wall and rotate your pedals around
backwards. Take note of the seat comfort relative to the
angle. Most of your weight should be on the back of the
seat with very little on the front. A level seat is a common
starting point.
Step 2: Adjust your seat angle by loosening the two seat
binder bolts with the supplied Allen tool. Adjust to the
desired position and retighten to
5Nm . Repeat step 1 and
adjust as needed.
Step 3: Test the Horizontal position while riding on the street
or trail for best pedaling comfort. To adjust, loosen the two
seat binder bolts and slide the seat to the desired position
while keeping the same angle. Retighten to
5Nm .
Note: Tighten the front bolt to drop the front and tighten
the rear bolt to raise the front. Turn both the same amount
to torque the final position.
SET UP