EMINENTCYCLES.COM
26
PEDALS
If you have purchased pedals with your bike, they are one
of two types of pedals, flat or clipless. Each of these types
of pedals are designed to improve engagement with your
riding shoe.
Warning:
For flat pedals, the grip pins can be sharp and
extra care should be taken to avoid serious injury during
operation.
For clipless pedals, riding shoes with mounting provisions
for the cleat are necessary. Check to make sure the
shoes and cleats are compatible. Once the shoes are
mounted with the provided cleat, it is recommended that
the user practice the motion of clipping in and out around
a soft grassy area. This will minimize the potential for
personal injury while getting to know your new pedals.
Continue to practice until this motion is instinctive and
then head out on the trails to practice. Most clipless pedal
release pressure/points can be adjusted.
Note:
Please refer to the pedal OEM Manual for specific
operation and adjustment.
DROPPER POST
Your bike has been supplied with a “Dropper Post” that
raises and lowers with a lever on the handlebar. Typically
the seatpost position is fully extended for uphill riding
(sitting) and lowered for downhill riding (standing). The
post should easily lower with you body weight when the
lever is pressed. You must remove your weight and press
the lever to raise the post. If the post is not activating or
slipping, a slight adjustment may be necessary.
If the post is sliding down, the cable may be too tight and
need to be loosened. Twist the barrel adjuster on the
lever so that it looks like it is going into the lever. If the seat
is not dropping or extending when pressing the lever, the
cable may be too loose and need to be tightened. Twist
the barrel adjuster so that it looks like it is coming out of
the lever. Repeat the process until the seatpost is operat-
ing to the desired function.
Note:
Please refer to the seatpost OEM Manual for
specific operation and adjustment.
O
PERATION
Summary of Contents for HASTE
