Rev. 3 02-2021
30
MTEC.DXi.H/DXi.HF.GB-3 Use and Maintenance technical manual DXi.H/DXi.HF English
Emibyte DXi.H/DXi.HF
Direct expansion close control
4.4 R
HFHLSWDQGLQVSHFWLRQ
During the installation or any intervention it is mandatory to follow strictly any norms reported on the present Manual, to follow the
onboard indications and apply every precaution in order to avoid any dangerous situation. At the unit receipt it is necessary to make a
visual inspection; the unit left the Manufacturer in perfect conditions, damages occurs during transport has to be immediately disputed
with the carrier noticing on the delivery sheet before signing in. The Manufacturer has to be informed about the damages within days from
UHFHYLQJRIWKHXQLW7KHXQLWRZQHUPXVWWRFRPSOHWHDZULWWHQUHSRUWLQWKHHYHQWRIVLJQL¿FDQWGDPDJH
Before to accept the delivery check carefully::
• The unit has not be damaged during the transport;;
• The delivered unit corresponds to the ones indicated on the transport document.
,IDQ\GDPDJHRUIDXOWRFFXUV
• Note immediately the damage on delivery document;
• Inform Manufacturer or supplier, within 8 days from receipt, about the damage type; reports after 8 days from receipt are not valid;
•
,QFDVHRIVLJQL¿FDQWGDPDJHFRPSOHWHDZULWWHQUHSRUW
4.5
6WRUDJHDQGWUDQVSRUW
If it was necessary to storage the unit, ensure to leave it in a closed and dry place; if the unit is already unpacked please follow the hereafter
indications to avold a possible corrosion, damage or deterioration:
• Be sure about every opening is well plugged or sealed;
• Dot use steam or aggressive detergents to clean the unit;
• Take out the control cabinet keys (if presents) and entrust them to the site manager.
The unit can be stocked to temperature between -10° to +65°C; during the stops it is recommended to be sure
about those temperatures in order to aavoid refrigerant’s leak from the safety valves.
The transport has to be done by authorized carriers and the truck characteristics must be such by to not damage the units during the load
and during the transport. Il trasporto If the road are bumpy, the truck must have suspension suitables to protect the unit from any damage.
The packaging could create risks for the operators
The packaging materials has to be separately preserved and delivered for disposal or eventually for recycle to the
responsible companies in order to reduce the environmental impact.
Keep out the material of reach of childrens.
8QSDFNLQJ
Is suggest to leave the packaged unit during the handling and remove it just before the installation. Be careful to remove the packaging in order
to avoid unit damages and operators dangers.
The materials which compose the packaging could be from different nature (wood, nylon, cardboard, etc.)
