Emerson Rosemount Analytical RDO, Manual

Page: 7 / 32

7
MODEL RDO INSTALLATION
1.3.3 Wall Mounting Using Mounting Tabs
The optional mounting kit contains a set of wall mount-
ing hardware that includes four screws, nuts, and tabs
for mounting the analyzer to a wall or panel. Follow the
instructions included with the mounting tab hardware to
attach the tabs (Figure 1-6).
1.3.4 Wall Mounting with User-supplied Screws and
Hardware
You can supply your own mounting hardware and
attach the analyzer to a wall. Figure 1-3 indicates the
placement of the nut. Use a screw that is best suited for
your wall material (Figure 1-7).
1.3.5 DIN Rail Mounting the Enclosure
1. Open the enclosure and drop one #6 screw into
each drilled corner of the box (Figure 1-8).
2. Use a long screwdriver to push the screw through
the back of the enclosure (Figure 1-8).
3. Place the DIN clip on the top of the enclosure with
the orientation shown in Figure 1-9.
4. Use a long screwdriver to tighten the screw to the
clip.
5. Repeat steps 2-4 for the remaining screw and clip.
6. Mount on a DIN rail.
FIGURE 1-6. Back view of analyzer with tabs
FIGURE 1-7. Back view of analyzer
Pre-drilled holes (0.15 in diam.)
FIGURE 1-8. Placing the screw in the enclosure
FIGURE 1-9. Securing the screw to the DIN clip