Emerson Rosemount 705, Reference Manual

Page: 29 / 70

25
Reference Manual
00809-0200-4705, Rev AB
Commissioning
May 2017
Commissioning
4.6 Verifying operation
There are four ways to verify operation: using the optional local display (LCD), using the Field
Communicator, using the Smart Wireless Gateway's integrated web interface, or by using AMS Suite. If
the Rosemount 705 Transmitter was configured with the Network ID and Join Key, and sufficient time has
passed, the transmitter will be connected to the network.
Troubleshooting
If the device is not joined to the network after power up, verify the correct configuration of the Network
ID and Join Key, and verify that Active Advertising has been enabled on the Gateway. The Network ID and
Join Key in the device must match the Network ID and Join Key of the Gateway.
Operating the local display
The LCD displays the configured values at the update rate, or can optionally be enabled for continuous
display. See
Enabling the LCD continuous operation feature .
Diagnostic button display sequence
More detailed diagnostic information can be obtained by removing the display cover of the Rosemount
705 Transmitter, and momentarily depressing the
DIAG button. The LCD will display the diagnostic
screens as shown in Figure 4-4 .
Press the Diagnostic button to display the TAG, Device ID, Software Revision, Network ID, Network Join
Status and Device Status screens.
Figure 4-3. Diagnostic Screen Sequence
Network join status
The chevron-shaped status bar at the top of the screen indicates the progress of the network join
process. When the status bar is filled, the device is successfully connected to the wireless network. This is
shown, in
Figure 4-4 on page 26 .
Tag Device ID Network ID
Network join
status
Device status
A b c d e
f g h
i d
-
1 2
3 4 5 6 7 8
n e t w k
13 0 5
I D
n e t w k
O K
S u p l y
7. 2 1
v o l t s