Reference Manual
00809-0100-4856 Rev AE
February 2020
Rosemount 356
A-5
5. Install locator and adjust the crimp tool according to the following
table:
Conductor size (mm
2
)
Crimp Setting (mm)
0.50
1.55
1.00
1.55
6. Insert the stranded wire into the crimp contact and then fully insert
the crimp contact into the locator. Cycle the tool to create the
crimp. Repeat this step for the remaining conductor wire(s).
7. Properly installed crimp contact is shown in the following photo.
Locator