Rosemount 356
Reference Manual
00809-0100-4856 Rev AE
February 2020
A-6
Install Cable Gland
1. Thread the cable through the loop of the plastic lanyard on the
protective cover (not shown in photo below). Place cable gland
components onto the cable as shown below. The Perfect EMC
cable gland includes a supplementary reducing ring for cables
having an outer diameter smaller than 9 mm. Remove the
reducing ring as appropriate.
2. With the cable gland parts positioned as shown, fold back and
spread the metal braiding.
3. Hold the lamellar insert against the metal braiding as shown
below, then slide the metal base over the insert so that the metal
braiding folds back and becomes firmly trapped between the two
pieces.
