manualshive.com logo in svg

Emerson Metro MPS-4009, Operation Manual Supplement

Share
Download
Emerson Metro MPS-4009 Operation Manual Supplement Download Page 32

32 

MPS-4009 Multi-Chemistry Power Supply Operations Manual Supplement 

 

InterMetro Industries Corporation  

 

Status 

Click on the “Status” tab to display RF Signal Strength, Battery Health and firmware 
information. 

Status Tab Display 

Select “Status” tab in Metro BatteryPro Power 
Properties dialog. 

Display includes: 

1. 

Power supply configuration information. 

2. 

Available disk space and required disk 
space for hibernation. 

Click on “X” to minimize the dialog back to the 
status tray icon. 

Click on another tab to view or edit other settings.

Diagnosis 

When revealed, clicking on the “Diagnosis” tab provides a running list of power supply and 
battery data for troubleshooting purposes.

 

Notice:

  The hidden Metro BatteryPro “Diagnosis” tab is revealed by holding down the 

“Ctrl” key and clicking on the “Metro” icon in the Metro BatteryPro dialog display. 

Reveal Diagnosis Tab 

While holding down “Ctrl” key, click on red 
Metro™ Healthcare icon in upper left of dialog to 
reveal hidden “Diagnosis” tab. 

 

Summary of Contents for Metro MPS-4009



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands