36 Chapter 3 Electrical Installation
NX UPS Single Module And Parallel System 250kVA ~ 800kVA User Manual
Small cover
Step 1: Remove the small cover here
and lead the cables into the cabinet
Dry contact port and communication port
Step 3: Connect the cables to corresponding ports
Step 4: Replace the cable trough cover
Step 2: Remove the cable trough cover here
and route the cables through the cable trough
Figure 3-18 Signal cable entry and routing method (600kVA ~ 800kVA)
3.3 Electrical Cabinet Connection (600kVA ~ 800kVA)
After making mechanical connection between the cabinets as instructed in
2.4.6 Mechanical Cabinet Connection
(600kVA ~ 800kVA)
, refer to Figure 3-19 and Figure 3-20 to make electrical connection between cabinets, including
the connection of the power cables, communication cables and battery cables. Refer to Figure 3-21 through
Figure 3-23 for the cabling routes.