Emerson Liebert APM 120 Manual Download Page 71

Page: 71 / 144

Liebert BDC

™

Liebert

APM

™

6.6

Bolting Cabinets Together

1. Line up cabinets so that mounting holes are aligned.

Figure 46 Bolting Liebert APM to a Liebert BDC

2. Using supplied hardware, bolt the cabinets together. The bolts may be inserted from either the

UPS side or from the Liebert BDC side, whichever is more convenient.

NOTE

UPS wiring must be completed before the cabinets are bolted together.

Hardware for bolting units is in a bag attached to
the Liebert BDC. See form included with UPS.

DETAIL A

3 Washer

Flat, M10

Washer
Split, M10

Hex Head
Bolt, M10

Place cabinets so mounting holes are aligned.

A bolt from the adjacent cabinet may be screwed into the threaded

top hole, or a bolt may be inserted through the lower hole and

screwed into the threaded hole in the adjacent cabinet.

Summary of Contents for Liebert APM 120

















































































































































Search results

Summary of Contents for Liebert APM 120

Reviews:

Related manuals for Liebert APM 120

Brands by name

Popular brands

Emerson Liebert APM 120, Manual

Search results

Summary of Contents for Liebert APM 120

Reviews:

Related manuals for Liebert APM 120

Brands by name

Popular brands