Emerson DIXELL XR30T, Installing And Operating Instructions

Page: 19 / 40

1592040000 XR30-60-70T EN v1.3 2020.08.26 XR30-60-70T 19/40
Min Minutes: 0 to 59 minutes
dAY Day of the week: Sun to Sat
dYM Day of the month: 1 to 31
Mon Month: 1 to 12
YAr Year: 00 to 99
Hd1 First day of weekend: (Sun to SAt; nu) setting for the first day of the weekend.
Hd2 Second day of weekend: (Sun to SAt; nu) setting for the second day of the weekend.
iLE
Energy saving cycle start time on working days: (00h00min to 23h50min) during the Energy
Saving cycle, the set point is increased by the value in HES so that the operation set point is
SET+HES .
dLE
Energy saving cycle duration on working days: (00h00min to 24h00min) sets the duration of
the Energy Saving cycle on working days.
iSE Energy saving cycle start time on weekends: 00h00min to 23h50min
dSE Energy saving cycle duration on weekends: 00h00min to 24h00min
ddx
Daily defrost enabled: (n; Y) to enable the Ld1 to Ld6 defrost operations for any day of the
week.
 dd1 = Sunday defrost
 dd2 = Monday defrost

dd3 = Tuesday defrost

dd4 = Wednesday defrost
 dd5 = Thursday defrost

dd6 = Friday defrost

dd7 = Saturday defrost
Ldx
Defrost start time: (00h00min to 23h50min) these parameters set the beginning of the
programmable defrost cycles during any ddx day. Example: when Ld2=12.4, the second defrost
starts at 12:40 am during working days.
5.1.13 Memory storage management – E2
MAP Current configuration: (C-1; C-2) to change configuration used.
LdM
Restore default factory settings: (n;Y) select Y and confirm to reload factory default values for
the configuration currently used.
rHA
Reset HACCP values: (n; Y) select Y and confirm to reset the memorized min and MAX
temperature values (HACCP function must be enabled).
5.1.14 Serial Communication port configuration parameters - CoM
Adr Serial address: (1 to 247) device address for Modbus communication
bAU Baudrate: (9.6; 19.2; 38.4; 57.6) select the correct baudrate for serial communication
PAr
Parity control: (no; odd; EvE) no=no parity control; odd=odd parity control; EvE=even parity
control
5.1.15 User Interface configuration parameters - Ui
SCS
User interface timeout: (1 to 255 sec) timeout before coming back to Home Screen or to
Programming Menu
bS Sound Level: (0 to 5) select the sound level of the gestures
PSU
Password for protected level Pr2: (000 to 999) insert a value to protect all the parameters set
on the level Pr2 from modification
5.1.16 Information, read only parameters - inF
dP1 Probe P1 value visualization
dP2 Probe P2 value visualization
dP3 Probe P3 value visualization
dP4 Probe P4 value visualization
rSE Real regulation Set Point
FdY Firmware release date: day
FMt Firmware release date: month
FYr Firmware release date: year
rEL Firmware release: progressive number
SUb Firmware sub release: progressive number
Ptb Parameter map version