Emerson DIXELL XR30T, Installing And Operating Instructions

Page: 22 / 40

1592040000 XR30-60-70T EN v1.3 2020.08.26 XR30-60-70T 22/40
AUS SAA Set point for auxiliary regulator 5.0 Pr2 °C
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
AUS SHy Auxiliary regulator differential 2.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
AUS ArP Probe selection for auxiliary regulator nP Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
AUS Sdd
Auxiliary regulator disabled during any
defrost cycle
no Pr2 n(0); Y(1)
AUS btA Base time for parameters Ato and AtF SEC Pr2 SEC; Min
AUS Ato Interval of time with auxiliary output ON 0 Pr2 sec 0 to 255 sec/min
AUS AtF Interval of time with auxiliary output OFF 0 Pr2 sec 0 to 255 sec/min
ALr ALP Probe selection for temperature alarms P1 Pr1 nP(0); P1(1); P2(2); P3(3); P4(4)
ALr ALC
Temperature alarms configuration: relative,
absolute
Ab Pr1 rE(0); Ab(1)
ALr ALU High temperature alarm 150.0 Pr1 °C
°C[0.0° to 50.0° or ALL to
150.0°]
°F[0.0° to 90.0° or ALL to 302.0°]
ALr ALL Low temperature alarm -100.0 Pr1 °C
°C[0.0° to 50.0° or -100.0° to
ALU]
°F[0.0° to 90.0° or -148.0° to
ALU]
ALr AFH Temperature alarm differential 2.0 Pr1 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
ALr ALd Temperature alarm delay 0 Pr1 min 0 to 255 min
ALr dot Temperature alarm delay with open door 00:00 Pr1 mm:ss 0.0 to 24min00sec
ALr dAo Temperature alarm delay at start-up 00:00 Pr1 hh:mm 0.0 to 24h00min
ALr AP2
Probe selection for second temperature
alarm
P2 Pr2 nP(0); P1(1); P2(2); P3(3); P4(4)
ALr AU1
Pre-alarm threshold for second
temperature alarm (absolute value)
150.0 Pr2 °C
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
ALr AH1
Second high temperature pre-alarm
differential
2.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
ALr Ad1 Second high temperature pre-alarm delay 255 Pr2 min 0 to 255 min
ALr AL2 Second low temperature alarm -100.0 Pr2 °C
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
ALr AU2 Second high temperature alarm 150.0 Pr2 °C
[-100.0°C to 150.0°C]
[-148.0°F to 302.0°F]
ALr AH2 Second temperature alarm differential 2.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
ALr Ad2 Second temperature alarm delay 0 Pr2 min 0 to 255 min
ALr dA2
Second temperature alarm delay at start-
up
00:00 Pr2 hh:mm 0.0 to 24h00min
ALr bLL
Compressor OFF due to second low
temperature alarm
no Pr2 n(0); Y(1)
ALr AC2
Compressor OFF due to second high
temperature alarm
n Pr2 n(0); Y(1); MAn(2)
ALr SAF Differential for anti-freezing control -1.0 Pr2 °C
[-12.0°C to 12.0°C]
[-21.6°F to 21.6°F]
ALr tbA Alarm relay deactivation no Pr2 n(0); Y(1)
oUt oA2 Relay output oA2 configuration dEF Pr2
nu(0); CP1(1); dEF(2); FAn(3);
ALr(4); LiG(5); AUS(6); db(7);
onF(8); HES(9); Cnd(10);
CP2(11); dF2(12); HEt(13);
inv(14)
oUt oA3 Relay output oA3 configuration FAn Pr2
nu(0); CP1(1); dEF(2); FAn(3);
ALr(4); LiG(5); AUS(6); db(7);
onF(8); HES(9); Cnd(10);
CP2(11); dF2(12); HEt (13);
inv(14)