Product operation (Personnel):
•
To prevent personal injury, personnel must follow all instructions of this manual prior to and during operation of the product.
•
Follow all warnings, cautions, and notices marked on, and supplied with, this product.
•
System should be designed to avoid over pressure conditions or exceeding maximum safe flow rate if meter losses
measurement.
•
Verify that this is the correct instruction manual for your Daniel product. If this is not the correct documentation, contact
Daniel at 1-713-827-6314. You may also download the correct manual from:
https://www.emerson.com/en-us/automation/
•
Read and understand all instructions and operating procedures for this product.
•
If you do not understand an instruction, or do not feel comfortable following the instructions, contact your Daniel
representative for clarification or assistance.
•
Install this product as specified in the INSTALLATION section of this manual per applicable local and national codes.
•
Follow all instructions during the installation, operation, and maintenance of this product.
•
Connect the product to the appropriate pressure and electrical sources when and where applicable. Never operate meter
above the maximum working pressure stated on the nameplate.
•
Ensure that all connections to pressure and electrical sources are secure prior to and during equipment operation.
•
Use only replacement parts specified by Daniel. Unauthorized parts and procedures can affect this product's performance,
safety, and invalidate the warranty. “Look-a-like” substitutions may result in deadly fire, explosion, release of toxic substances
or improper operation.
•
Save this instruction manual for future reference.
6
Summary of Contents for Daniel PT
Page 2: ...2 ...
