Chapter 2 Mechanical Installation 5
Liebert.PEX Chilled Water Series Air Conditioner User Manual
Figure 2-3 Straightening the hook
At first, straighten all the hooks that fix side board I, and remove side board I. Then straighten all the hooks
that fix side board II, and remove side board II. At last remove top cover III, as shown in Figure 2-4.
Kg
1790 x 950 x 2020mm
1816 x 976 x 2175mm
I
I
III
II
II
Figure 2-4 Removing side boards and top cover
2. Removing the pallet
The chilled water AC is fixed onto the pallet with M10 × 70 screws, as shown in Figure 2-5. You can use an M10
open-end spanner, a ratchet spanner or a sleeve to remove the fixing screws.
底板固定
Pallet fixing screw (M10 70)
×
Figure 2-5 Fixing screw position of pallet
2.1.3 Inspection
After receiving the product, you should check it against the packing list. If any parts are found missing,
distorted or damaged, please report to the carrier immediately. If any covert defects are found, please report
to the carrier and the local office of Emerson Network Power Co., Ltd.