32
100-214-294 REV. 05
6.2.1
M Series Explanation of Controls
Figure 6.1
M Series Controls
6.2.2
Degassing
For initial cleaning solution degassing.
Table 6.2
M Series Explanation of Controls
Control
Function
Main Power Switch
This switch is located on the back of the unit, next to the power
cord receptacle.
• Press the on side to power on the unit
• Press the off side to power off the unit
When operating the unit, normally leave the Main Power switch
in the on position, and use the Timer Knob to activate
ultrasonics.
Timer Knob
Activates ultrasonics and sets time.
• Turn clockwise for timed operation (0–60 minutes)
• Turn counterclockwise to the HOLD position for continuous
operation
• Turn to the zero position to turn unit Off
Table 6.3
For initial cleaning solution degassing.
Step
Action
1
Turn Main Power switch on.
2
Turn the Timer Knob clockwise to 5–10 and let the unit run to allow the
solution to “degas”.
NOTICE
Summary of Contents for Branson CPX1800
