2
Installation, Operation and Maintenance Manual
MAN-02-10-93-0700-EN Rev. 0
May 2019
Section 1: Introduction
Introduction
Section 1: Introduction
The Multi-Port Actuator is an single turn actuator for control of multi-port flow selectors
(MPFS) with 3 to 8 ports. A typical application is oil or gas well selection for well production
testing as shown in Figure 1. Typically the MPA is the actuator of a Multi-Port Flow Selector
as shown in Figure 2. There are applications in other processes where control of multi-port
valves is required.
Figure 1
Typical Well Test Application
Figure 2
MPA mounted on 6"x16" MPFS
