Emerson AMS, Installation Manual

Page: 24 / 92

• AMS Asset Monitor
• +24 V DC Power Module
• CHARMs (CHARM types in accordance to the supervision tasks)
• CHARM Terminal Blocks suitable for the selected CHARMs
• Cable glands, suitable for the environmental conditions on-site
• Address plug with suitable terminal block
The AMS Asset Monitor supports the VI Piezo CHARM and the DeltaV hardware listed in
Table 4-1 .
Table 4-1: Supported DeltaV devices
Hardware Type
number Description
RTD CHARM KL3031X1-
BA1 CHARM for temperature measurement with
RTD sensors
Thermocouple/mV input CHARM KL3032X1-
BA1 CHARM for temperature measurement with
Thermocouples
AI 4 to 20 mA CHARM
1
KL3021X1-
BA1 Analog input CHARM for 4 to 20 mA signals
DI 24 V DC Low-Side Sens (dry
contact) CHARM KL3003X1-
BA1 Discrete input CHARM for sensing relay/switch
contact closure
DO 24 V DC High-Side CHARM KL3002X1-
BA1 Discrete output CHARM for momentary output
signals or continuous pulse outputs
Standard Terminal Block KL4502X1-
BA1 Terminal block for connection most of the
CHARMs
Thermocouple/mV Terminal Block KL4502X1-
NA1
Terminal block for thermocouple sensors or
mV signals
Relay Output Terminal Block KL4502X1-
MA1 Output terminal block with relay contacts
Address Terminal Screw Block KL4502X1-
DA1 Screw terminal block for address plug
Address Terminal Plug #1 KL4501X1-
BA1 Address plug
CHARM Protection Cover KL4502X1-
QA1 Protection cover that fits all terminal blocks
CHARM labeling component KL4502X1-
JA1 Horizontal channel identifier label
1 No HART ( H ighway A ddressable R emote T ransducer) support.
The electrical rating of all devices listed in Table 4-1 , except the Relay Output Terminal
Block (KL4502X1-MA1), is maximal 150 mA at 24 V DC. The electrical rating of the Relay
Output Terminal Block is maximal 5 A at 250 V, overvoltage category 2.
The AMS Asset Monitor has cable entries with 1/2-NPT cable gland threading.
Installing AMS Asset Monitor hardware Installation Guide
April 2020 MHM-97923-PBF
24 MHM-97923-PBF, Rev. 1.0