EES-101 Series Ultrasonic Flowmeter
Revision: 3.0.1
Page 10 of 65
Example1: To enter a pipe outside diameter of 219.234, the
procedure is as follows:
Press
keys to enter Window M11 (the
numerical value displayed currently is a previous value). Now
press
key. The symbol ">" and the flashing cursor are
displayed at the left end of the second line on the Screen. Then
input the value parameters
.
You can check the selected option by visiting Option Type
Windows. If you want to modify it, you must press
first,
the symbol ">" and the flashing cursor are displayed at the left
of the Screen. Operator can use the
and
to scroll
the screen and get the required value then press
to
confirm.
For example, if the pipe material is "Stainless Steel", Press
to enter Window M14, press
to modify
the options. Select the "1. Stainless Steel" option by pressing
and
, then press
to confirm the selection.
Attention
Generally, press
key first if operator wants to enter "modify" status. If the "modify" is still not
possible even after pressing the
key, it means that system is locked by a password. To
"Unlock" it, select "Unlock" in Window M47 and enter the original password.
1.6
Flowmeter Window Descriptions
These windows are assigned as follows:
01~08
Flow Totalizer Display: to display flow rate, positive total, negative total, net total, velocity, date &
time, present operation and flow results today, etc.
10~29
Initial Parameter Setup: to enter pipe outside diameter, pipe wall thickness, fluid type, transducer type,
transducer mounting method and spacing, etc.
30~38
Flow Units Options: to select the flow unit such as cubic meter, liter or other units, can turn totalizers
on/off and reset totalizers, etc.
40~49
Setup options: Scaling factor, system lock (Window M47), etc.
55~89
Input and output setup: date and time, ESN, communication baud rate setting, etc.
90~98
Diagnoses: Signal strength and signal quality (Window M90), TOM/TOS*100 (Window M91), flow
sound velocity (Window M92), total time and delta time (Window M93), Reynolds number and factor
(Window M94), etc.
+0~+5 Appendix: power on/off time, total working hours, on/off times and a single-accuracy function calculator.
Attention
The other windows for hardware adjustment are reserved by the manufacturer.
Menu
1
1
Enter
2
1
9
●
2
3
4
5
Enter
Pipe Outer Diameter
>_
Enter
^
^
Enter
Menu
1
4
Enter
^
^
Enter
Pipe Material [14
>1. Stainless Steel
Enter
Enter