EMCS User Guide
- 14 -
Cmd #
Command
Range
Default
23
Ring Phone Extension
0 = OFF (incoming will not ring remote)
1 = ON (remote phone rings on incoming
call – required for CID alarm display)
0
24
Caller ID Update Timer
1-30 minutes (alarm reporting frequency) 1
25
Start PLM Test
1 = CONFIRM
N/A
26
PLM Check Interval
0 = 12 hours
1 = 5 hours
0
30
Handset Volume Setting
0 = soft, 9 = loud
5
31
Handset Mic. Sensitivity
0 = least sensitive; 9 = most sensitive
5
32
TEL1 Line boost
0 = min; 9 = max boost
2
33
TEL 2 Line boost
0 = min; 9 = max boost
2
34
Rem. Phone attenuation 0 = min.; 8 = max attenuation
4
43
Factory Reset
1 = CONFIRM
N/A
44
Remote Silence Buzzer
1 = CONFIRM
N/A
45
PIM Firmware Version
Replay only
Pre-set
46
CSM Firmware Version
Replay only
Pre-set
47
CSM Hardware Version
Replay only
Pre-set
50
PLM Group 0 (OFF)
1-6 (or 1-12 with EMCS-EXP)
-
51
PLM Group 1
1-6 (or 1-12 with EMCS-EXP) default
All cabs
52
PLM Group 2
1-6 (or 1-12 with EMCS-EXP)
-
53
PLM Group 3
1-6 (or 1-12 with EMCS-EXP)
-
54
PLM Group 4
(only with EMCS-EXP) 1-12
-
55
PLM Group 5
(only with EMCS-EXP) 1-12
-
56
PLM Group 6
(only with EMCS-EXP) 1-12
-
60
EMCS ID
0-9 (set > 0 if more than one EMCS)
0
