EmerCom Technologies EMCS Series, User Manual

Page: 21 / 30

EMCS User Guide
- 21 -
6.3 Remote Programming
Lift the EMC-MR/Remote Phone handset. If an internal emergency call or an internal
ALL CALL or an internal non-emergency call is already in-progress, the EMC-MR will
join the call; otherwise the Consolidator will answer with one of the following prompts:

“ Station number #x is in conversation ”

“ No available phone lines ”

“ Phone line number #y is unavailable ”

“ Off-site ALL CALL in-progress ” or

“ Select the station number you wish to speak to followed by the star (
*
) key, or
select star-star (
**
) for further options ”
- Select star-star ( ** )
 “ Select nine-star (9
*
) to call off-site, zero-star (0
*
) to call the lobby,
select star-star ( ** ) to initiate an all system page or enter the
access code for programming mode ” (factory default is 12345)
- Enter the access code, to which the Consolidator will respond “ Program ”
followed by a confirmation beep unless the access code is incorrect, in
which case the prompt “
Incorrect entry, please re-enter ” will play.
In remote programming, key sequences exist to replicate the functions found on the
Consolidator keypad. Use the following table to look-up the equivalent remote key
sequence for the different keypad functions:
Keypad Equivalent Remote Sequence
PROGRAM 99* + “ Access Code ”
CANCEL *1
ENTER **
REPLAY #
EXIT *9