EMCS User Guide
- 17 -
6.2.8
Command # 8: ALARM STATUS PLAYBACK
The <ALARM STATUS> touch key and “Alarm Status Playback” command report the
system alarm status (power, battery, TEL line and cab phone condition).
Voice Prompt:
“
Alarm status
”
Note
: The battery is a rechargeable NiMH battery and should have a full charge within 1
day of connecting the Consolidator to AC power. Replace with a factory-supplied battery
if the alarm status indicates a dead battery or once every 5 years.
6.2.9
Command # 9: ACCESS CODE
Entry of a 5-digit access code will be required for remote programming. Changing the
access code to a unique number will prevent others calling in and modifying the
settings. Default is
1 2 3 4 5
.
Caution
: Programming by calling in remotely will not be possible without the access
code.
Voice Prompt:
“
Access code
”
6.2.10
Command # 10: LANGUAGE
The Consolidator has built-in voice prompts to assist emergency personnel when an
emergency call is in progress and to assist during programming. Set to either English
(0) or French (1).
Voice Prompt:
“
Language
”
6.2.11
Command # 14: AUTO ANSWER
The auto answer setting determines whether the Consolidator accepts off-site calls from
either phone line.
Voice Prompt:
“Auto answer”
