30
WEEE Disassembly Instructions for the
TAE and TAE-DC Disk Array Enclosure
13.0.2.2 Removing the LCC PCB Heat Sink and LCC PCB
1.
To remove the heat sink (spring clip and hook type):
a.
Press down on one side of heat sink spring clip and unhook from the PCB
(circled).
b.
Lift the heat sink off of PCB.
Figure 17. Disengaging the LCC PCB heat sink
2.
To access the LCC PCB:
a.
13.0.2.1 Removing LCC Components
b.
Flip the LCC PCB over and remove the two screws that attach the black
insulator.
The LCC PCB is now ready to recycle.
